This PR modernizes the memory management architecture in SRS by
refactoring RTMP message handling to use shared pointers
(SrsSharedPtr<SrsMemoryBlock>) instead of manual memory management. This
change improves memory safety, reduces the risk of memory leaks, and
provides a cleaner abstraction for message payload handling.
* Introduced `SrsMemoryBlock`: A dedicated class for managing memory
buffers with size information
* Replaced manual memory management: `SrsCommonMessage` and
`SrsSharedPtrMessage` now use `SrsSharedPtr<SrsMemoryBlock>` instead of
raw pointers
* Updated `SrsRtpPacket`: Now uses `SrsSharedPtr<SrsMemoryBlock>` for
shared buffer management
---------
Co-authored-by: OSSRS-AI <winlinam@gmail.com>
Move global xpps statistics variables from `srs_app_server.cpp` to
`srs_kernel_kbps.cpp`.
Extract global shared timers from `SrsServer` into new `SrsSharedTimer`
class.
Extract WebRTC session management logic from `SrsServer` into dedicated
`SrsRtcSessionManager` class.
Extract PID file handling into dedicated `SrsPidFileLocker` class.
---------
Co-authored-by: OSSRS-AI <winlinam@gmail.com>
This PR consolidates the SRT and RTC server functionality into the main
SrsServer class, eliminating the separate `SrsSrtServer` and
`SrsRtcServer` classes and their corresponding adapter classes. This
architectural change simplifies the codebase by removing the hybrid
server pattern and integrating all protocol handling directly into
`SrsServer`.
As unified connection manager (`_srs_conn_manager`) for all protocol
connections, all incoming connections are checked against the same
connection limit in `on_before_connection()`. This enables consistent
connection limits: `max_connections` now protects against resource
exhaustion from any protocol, not just RTMP.
Remove modules because it's not used now, so only keep the server
application module and main entry point. Remove the wait group to run
server, instead, directly run server and invoke the cycle method.
After this PR, the startup workflow and servers architecture should be
much easier to maintain.
---------
Co-authored-by: OSSRS-AI <winlinam@gmail.com>
This PR introduces a comprehensive stream publish token system that
prevents race conditions when multiple publishers attempt to publish to
the same stream URL simultaneously across different protocols (RTMP,
WebRTC, SRT).
* Race Condition Issue: Multiple publishers could create duplicate
sources for the same stream when context switches occurred during source
initialization in SRS's coroutine-based architecture
* Cross-Protocol Conflicts: Different protocols (RTMP, RTC, SRT) could
simultaneously publish to the same stream URL without coordination
* Resource Management: No centralized mechanism to ensure exclusive
stream publishing access
---------
Co-authored-by: OSSRS-AI <winlinam@gmail.com>
This PR fixes a critical race condition in SRS source managers where
multiple coroutines could create duplicate sources for the same stream.
- **Atomic source creation**: Source lookup, creation, and pool
insertion now happen atomically within lock scope
- **Consistent interface**: Standardize on `ISrsRequest*` interface
throughout codebase
- **Handler simplification**: Remove `ISrsLiveSourceHandler*` parameter,
obtain from global server instance
---------
Co-authored-by: OSSRS-AI <winlinam@gmail.com>
This PR makes WebRTC a core feature of SRS and enforces C++98
compatibility by:
1. Always Enable WebRTC Support
- Remove `--rtc=on|off` configuration option - WebRTC is now always
enabled
- Eliminate all `#ifdef SRS_RTC` conditional compilation blocks
- Include WebRTC-related modules (RTC, SRTP, DTLS) in all builds
- Update build scripts to always link WebRTC dependencies
2. Enforce C++98 Compatibility
- Remove `--cxx11=on|off` and `--cxx14=on|off` configuration options
- Force `SRS_CXX11=NO` and `SRS_CXX14=NO` in build system
- Move these options to deprecated section with warnings
- Ensure codebase maintains C++98 standard compatibility
3. Remove Windows/Cygwin Support
- Remove all Windows and Cygwin64 conditional compilation blocks (#ifdef
_WIN32, #ifdef CYGWIN64)
- Delete Cygwin64 build configurations from build scripts (
auto/options.sh, auto/depends.sh, configure)
- Remove Cygwin64 assembly files and State Threads platform support (
md_cygwin64.S)
- Eliminate Windows-specific GitHub Actions workflows and CI/CD jobs
- Remove NSIS packaging files and Windows installer generation
- Delete Windows documentation and update feature lists to mark support
as removed in v7.0
- Simplify OS detection to only support Unix-like systems (Linux, macOS)
4. Code Cleanup
- Remove conditional WebRTC code blocks throughout the codebase
- Simplify build configuration by removing WebRTC-related conditionals
- Update constructor delegation patterns to be C++98 compatible
- Fix vector initialization to use C++98 syntax
- Eliminate Windows-specific implementations for file operations, time
handling, and networking
- Unified platform handling with consistent POSIX API usage
---------
Co-authored-by: OSSRS-AI <winlinam@gmail.com>
This PR removes the multi-threading infrastructure from SRS and
consolidates the codebase to use single-thread architecture exclusively.
This is a architectural simplification that aligns with SRS's
coroutine-based design philosophy.
* Simplified Architecture: Eliminates complexity of multi-threading
coordination
* Better Alignment: Matches SRS's coroutine-based single-thread design
philosophy
* Reduced Complexity: Removes potential race conditions and threading
bugs
* Cleaner Code: More focused modules with clear responsibilities
* Easier Maintenance: Fewer moving parts and clearer execution flow
---------
Co-authored-by: OSSRS-AI <winlinam@gmail.com>
1. print the error messages before dismiss it;
2. free the err to avoid memory leak;
## Cause
found this issue when research #4434 .
## Impact
1. develop
2. 5.0release
3. 6.0release
---------
Co-authored-by: winlin <winlinvip@gmail.com>
Rtp packets may be retransmitted, disordered, jittery, delayed,
etc.There may be abnormalities when converting to rtmp.
To reproduce this problem, you need to set the network reordering by
[tc-ui](https://github.com/ossrs/tc-ui). Note that you need a linux
server, and start it by docker:
```bash
docker run --network=host --privileged -it --restart always -d \
--name tc -v /lib/modules:/lib/modules:ro ossrs/tc-ui:1
```
Set up 5% packet reordering and a 1ms delay; then you will notice that
the audio is stuttering, somewhat noisy, and lacks fluency.
```bash
curl http://localhost:2023/tc/api/v1/config/raw -X POST \
-d 'tcset ens5 --direction incoming --delay 40ms --reordering 5% --port 8000'
```
> Note: Even without network conditions, the natural state can also
cause packet reordering, especially in public cloud platforms such as
AWS EC2.
> Note: You can use command `curl
http://localhost:2023/tc/api/v1/config/raw -X POST -d 'tcdel --all
ens5'` to reset the network condition settings.
Check the web console, you will see the reordering setup:
<img width="500" alt="TC Settings"
src="https://github.com/user-attachments/assets/b278fdf4-9fcc-4aac-b534-dfa34e28c371"
/>
Then, publish stream via WHIP: http://localhost:8080/players/whip.html
And, play via HTTP-FLV: http://localhost:8080/players/srs_player.html
Finished by AI:
* [AI: Extract audio jitter buffer to class
AudioPacketCache](a4097d9374)
* [AI: Add utest and fix
bug.](c919227af5)
---------
Co-authored-by: Haibo Chen <495810242@qq.com>
Co-authored-by: winlin <winlinvip@gmail.com>
## Introduce
This PR adds support for viewing streams via the RTSP protocol. Note
that it only supports viewing streams, not publishing streams via RTSP.
Currently, only publishing via RTMP is supported, which is then
converted to RTSP. Further work is needed to support publishing RTC/SRT
streams and converting them to RTSP.
## Usage
Build and run SRS with RTSP support:
```
cd srs/trunk && ./configure --rtsp=on && make -j16
./objs/srs -c conf/rtsp.conf
```
Push stream via RTMP by FFmpeg:
```
ffmpeg -re -i doc/source.flv -c copy -f flv rtmp://localhost/live/livestream
```
View the stream via RTSP protocol, try UDP first, then use TCP:
```
ffplay -i rtsp://localhost:8554/live/livestream
```
Or specify the transport protocol with TCP:
```
ffplay -rtsp_transport tcp -i rtsp://localhost:8554/live/livestream
```
## Unit Test
Run utest for RTSP:
```
./configure --utest=on & make utest -j16
./objs/srs_utest
```
## Regression Test
You need to start SRS for regression testing.
```
./objs/srs -c conf/regression-test-for-clion.conf
```
Then run regression tests for RTSP.
```
cd srs/trunk/3rdparty/srs-bench
go test ./srs -mod=vendor -v -count=1 -run=TestRtmpPublish_RtspPlay
```
## Blackbox Test
For blackbox testing, SRS will be started by utest, so there is no need
to start SRS manually.
```
cd srs/trunk/3rdparty/srs-bench
go test ./blackbox -mod=vendor -v -count=1 -run=TestFast_RtmpPublish_RtspPlay_Basic
```
## UDP Transport
As UDP requires port allocation, this PR doesn't support delivering
media stream via UDP transport, so it will fail if you try to use UDP as
transport:
```
ffplay -rtsp_transport udp -i rtsp://localhost:8554/live/livestream
[rtsp @ 0x7fbc99a14880] method SETUP failed: 461 Unsupported Transport
rtsp://localhost:8554/live/livestream: Protocol not supported
[2025-07-05 21:30:52.738][WARN][14916][7d7gf623][35] RTSP: setup failed: code=2057
(RtspTransportNotSupported) : UDP transport not supported, only TCP/interleaved mode is supported
```
There are no plans to support UDP transport for RTSP. In the real world,
UDP is rarely used; the vast majority of RTSP traffic uses TCP.
## Play Before Publish
RTSP supports audio with AAC and OPUS codecs, which is significantly
different from RTMP or WebRTC.
RTSP uses commands to exchange SDP and specify the audio track to play,
unlike WHEP or HTTP-FLV, which use the query string of the URL. RTSP
depends on the player’s behavior, making it very difficult to use and
describe.
Considering the feature that allows playing the stream before publishing
it, it requires generating some default parameters in the SDP. For OPUS,
the sample rate is 48 kHz with 2 channels, while AAC is more complex,
especially regarding the sample rate, which may be 44.1 kHz, 32 kHz, or
48 kHz.
Therefore, for RTSP, we cannot support play-then-publish. Instead, there
must already be a stream when playing it, so that the audio codec is
determined.
## Opus Codec
No Opus codec support for RTSP, because for RTC2RTSP, it always converts
RTC to RTMP frames, then converts them to RTSP packets. Therefore, the
audio codec is always AAC after converting RTC to RTMP.
This means the bridge architecture needs some changes. We need a new
bridge that binds to the target protocol. For example, RTC2RTMP converts
the audio codec, but RTC2RTSP keeps the original audio codec.
Furthermore, the RTC2RTMP bridge should also support bypassing the Opus
codec if we use enhanced-RTMP, which supports the Opus audio codec. I
think it should be configurable to either transcode or bypass the audio
codec. However, this is not relevant to RTSP.
## AI Contributor
Below commits are contributed by AI:
* [AI: Remove support for media transport via
UDP.](755686229f)
* [AI: Add crutial logs for each RTSP
stage.](9c8cbe7bde)
* [AI: Support AAC doec for
RTSP.](7d7cc12bae)
* [AI: Add option --rtsp for
RTSP.](f67414d9ee)
* [AI: Extract SrsRtpVideoBuilder for RTC and
RTSP.](562e76b904)
---------
Co-authored-by: Jacob Su <suzp1984@gmail.com>
Co-authored-by: winlin <winlinvip@gmail.com>
This PR refactors the RTMP to RTC bridge to support multiple video
tracks by implementing lazy initialization of audio and video tracks.
Instead of pre-determining track parameters during bridge construction,
tracks are now initialized dynamically when the first packet of each
type is received, allowing proper codec detection and track
configuration for dual video track scenarios.
Failed to view WHEP with HEVC before publishing RTMP, because the
default codec is AVC and will not be updated until the stream is
published. This enables better handling of streams with multiple video
tracks in RTMP to WebRTC bridging scenarios. Now, you are able to:
1. View WHEP with HEVC: Play with WebRTC:
http://localhost:8080/players/whep.html?schema=http&&codec=hevc
2. Then publish by RTMP: `ffmpeg -stream_loop -1 -re -i doc/source.flv
-c:v libx265 -profile:v main -preset fast -b:v 2000k -maxrate 2000k
-bufsize 2000k -bf 0 -c:a aac -b:a 48k -ar 44100 -ac 2 -f flv
rtmp://localhost/live/livestream`
Or publish RTMP with HEVC, then view by WHEP.
Note that if the codecs do not match, the error log will display RTC:
`Drop for ssrc xxxxxx not found`. For example, this can occur if you
publish RTMP with HEVC while viewing the stream with AVC.
**Introduce**
This pull request builds upon the foundation laid in
https://github.com/ossrs/srs/pull/4289 . While the previous work solely
implemented unidirectional HEVC support from RTMP to RTC, this
submission further enhances it by introducing support for the RTC to
RTMP direction.
**Usage**
Launch SRS with `rtc2rtmp.conf`
```bash
./objs/srs -c conf/rtc2rtmp.conf
```
**Push with WebRTC**
Upgrade browser to Chrome(136+) or Safari(18+), then open [WHIP
encoder](http://localhost:8080/players/whip.html?schema=http&&codec=hevc),
push stream with URL that enables HEVC by query string `codec=hevc`:
```bash
http://localhost:1985/rtc/v1/whip/?app=live&stream=livestream&codec=hevc
```
This query string `codec=hevc` is used to select the video codec, and
generate lines in the answer SDP.
```
m=video 9 UDP/TLS/RTP/SAVPF 49 123
a=rtpmap:49 H265/90000
```
The encoder log also show the codec:
```
Audio: opus, 48000HZ, channels: 2, pt: 111
Video: H265, 90000HZ, pt: 49
```
**Play with RTMP**
Play HEVC stream via RTMP.
```bash
ffplay -i rtmp://localhost/live/livestream
```
You will see the codec in logs:
```
Stream #0:0: Audio: aac (LC), 48000 Hz, stereo, fltp
Stream #0:1: Video: hevc (Main), yuv420p(tv, bt709), 320x240, 30 fps, 30 tbr, 1k tbn
```
You can also use [WHEP
player](http://localhost:8080/players/whep.html?schema=http&&codec=hevc)
to play the stream.
Important refactor with AI:
* [AI: Refactor packet cache for RTC frame
builder.](b8ffa1630e)
* [AI: Refactor the packet copy and free for
SrsRtcFrameBuilder](f3487b45d7)
* [AI: Refactor the frame detector for
SrsRtcFrameBuilder](4ffc1526b9)
* [AI: Refactor the packet_video_rtmp for
SrsRtcFrameBuilder](81f6aef4ed)
* [AI: Add utests for
SrsCodecPayload.codec](61eb1c0bfc)
* [AI: Add utests for VideoPacketCache in
SrsRtcFrameBuilder.](fd25480dfa)
* [AI: Add utests for VideoFrameDetector in
SrsRtcFrameBuilder.](b4aa977bbd)
* [AI: Add regression test for RTC2RTMP with
HEVC.](5259a2aac3)
---------
Co-authored-by: Jacob Su <suzp1984@gmail.com>
Co-authored-by: winlin <winlinvip@gmail.com>
SrsUniquePtr does not support array or object created by malloc, because
we only use delete to dispose the resource. You can use a custom
function to free the memory allocated by malloc or other allocators.
```cpp
char* p = (char*)malloc(1024);
SrsUniquePtr<char> ptr(p, your_free_chars);
```
This is used to replace the SrsAutoFreeH. For example:
```cpp
addrinfo* r = NULL;
SrsAutoFreeH(addrinfo, r, freeaddrinfo);
getaddrinfo("127.0.0.1", NULL, &hints, &r);
```
Now, this can be replaced by:
```cpp
addrinfo* r = NULL;
getaddrinfo("127.0.0.1", NULL, &hints, &r);
SrsUniquePtr<addrinfo> r2(r, freeaddrinfo);
```
Please aware that there is a slight difference between SrsAutoFreeH and
SrsUniquePtr. SrsAutoFreeH will track the address of pointer, while
SrsUniquePtr will not.
```cpp
addrinfo* r = NULL;
SrsAutoFreeH(addrinfo, r, freeaddrinfo); // r will be freed even r is changed later.
SrsUniquePtr<addrinfo> ptr(r, freeaddrinfo); // crash because r is an invalid pointer.
```
---------
Co-authored-by: Haibo Chen <495810242@qq.com>
Co-authored-by: john <hondaxiao@tencent.com>
## How to reproduce?
1. Refer this commit, which contains the web demo to capture screen as
video stream through RTC.
2. Copy the `trunk/research/players/whip.html` and
`trunk/research/players/js/srs.sdk.js` to replace the `develop` branch
source code.
3. `./configure && make`
4. `./objs/srs -c conf/rtc2rtmp.conf`
5. open `http://localhost:8080/players/whip.html?schema=http`
6. check `Screen` radio option.
7. click `publish`, then check the screen to share.
8. play the rtmp live stream: `rtmp://localhost/live/livestream`
9. check the video stuttering.
## Cause
When capture screen by the chrome web browser, which send RTP packet
with empty payload frequently, then all the cached RTP packets are
dropped before next key frame arrive in this case.
The OBS screen stream and camera stream do not have such problem.
## Add screen stream to WHIP demo
><img width="581" alt="Screenshot 2024-08-28 at 2 49 46 PM"
src="https://github.com/user-attachments/assets/9557dbd2-c799-4dfd-b336-5bbf2e4f8fb8">
---------
Co-authored-by: winlin <winlinvip@gmail.com>
To manage an object:
```cpp
// Before
MyClass* ptr = new MyClass();
SrsAutoFree(MyClass, ptr);
ptr->do_something();
// Now
SrsUniquePtr<MyClass> ptr(new MyClass());
ptr->do_something();
```
To manage an array of objects:
```cpp
// Before
char* ptr = new char[10];
SrsAutoFreeA(char, ptr);
ptr[0] = 0xf;
// Now
SrsUniquePtr<char[]> ptr(new char[10]);
ptr[0] = 0xf;
```
In fact, SrsUniquePtr is a limited subset of SrsAutoFree, mainly
managing pointers and arrays. SrsUniquePtr is better than SrsAutoFree
because it has the same API to standard unique ptr.
```cpp
SrsUniquePtr<MyClass> ptr(new MyClass());
ptr->do_something();
MyClass* p = ptr.get();
```
SrsAutoFree actually uses a pointer to a pointer, so it can be set to
NULL, allowing the pointer's value to be changed later (this usage is
different from SrsUniquePtr).
```cpp
// OK to free ptr correctly.
MyClass* ptr;
SrsAutoFree(MyClass, ptr);
ptr = new MyClass();
// Crash because ptr is an invalid pointer.
MyClass* ptr;
SrsUniquePtr<MyClass> ptr(ptr);
ptr = new MyClass();
```
Additionally, SrsAutoFreeH can use specific release functions, which
SrsUniquePtr does not support.
---------
Co-authored-by: Jacob Su <suzp1984@gmail.com>
1. Add live benchmark support in srs-bench, which only connects and
disconnects without any media transport, to test source creation and
disposal and verify source memory leaks.
2. SmartPtr: Support cleanup of HTTP-FLV stream. Unregister the HTTP-FLV
handler for the pattern and clean up the objects and resources.
3. Support benchmarking RTMP/SRT with srs-bench by integrating the gosrt
and oryx RTMP libraries.
4. Refine SRT and RTC sources by using a timer to clean up the sources,
following the same strategy as the Live source.
---------
Co-authored-by: Haibo Chen <495810242@qq.com>
Co-authored-by: Jacob Su <suzp1984@gmail.com>
1. When converting RTC to RTMP, it is necessary to synchronize the audio
and video timestamps. When the synchronization status changes, whether
it is unsynchronized or synchronized, print logs to facilitate
troubleshooting of such issues.
2. Chrome uses the STAP-A packet, which means a single RTP packet
contains SPS/PPS information. OBS WHIP, on the other hand, sends SPS and
PPS in separate RTP packets. Therefore, SPS and PPS are in two
independent RTP packets, and SRS needs to cache these two packets.
---------
Co-authored-by: john <hondaxiao@tencent.com>
In an SDK that supports RTC Opus stereo, the parameter "stereo=1" may
appear. SRS (Spatial Reference System) needs to handle this correctly
and return an answer to enable WebRTC stereo support.
---------
`TRANS_BY_GPT4`
When accessing the SRS Stack, you should log in and use a token for each
request, or utilize the HTTP API with a secret Bearer token included in
every request. The SRS Stack HTTP API proxies both /api/v1 and /rtc/v1
to the SRS HTTP API while ensuring secure authentication. Additionally,
there is a console in the SRS Stack that requires the same token to
request the SRS Stack HTTP API, which is then proxied to the SRS HTTP
API.
The SRS Stack runs SRS with the HTTP API listening at 127.0.0.1:1985 on
the local loopback interface, allowing only the SRS Stack to access it
without authentication. All other users must login and access the SRS
Stack through its interface, rather than directly accessing the SRS HTTP
API within the SRS Stack.
---------
Co-authored-by: panda <542638787@qq.com>
1. Ignore SDP GROUP LS.
2. Support ice in global session info.
3. Support audio codec "OPUS" or "opus".
---------
Co-authored-by: Johnny <hellojinqiang@gmail.com>
* Remove extern SrsPps* duplicate declarations
* fix(rtmp2rtc): fix video payload type for rtmp to rtc bridge (#3041)
* Revert changes not belongs to this PR.
* Fix naming issue, follow SRS style.
* Use srs_assert instead of assert.
* Fix firefox no audio issue.
Co-authored-by: winlin <winlin@vip.126.com>
