diff --git a/.openclaw/skills/srs-develop/SKILL.md b/.openclaw/skills/srs-develop/SKILL.md
index 6bc2cede4..496bbedd7 100644
--- a/.openclaw/skills/srs-develop/SKILL.md
+++ b/.openclaw/skills/srs-develop/SKILL.md
@@ -152,6 +152,10 @@ Only after the user confirms the routing do you proceed to Step 2.
    ```
    bash scripts/proxy-e2e-cluster-test.sh
    ```
+   - Redis multi-proxy routing test (requires local Redis; starts two proxy instances with Redis LB, publishes through one proxy, verifies playback through the other):
+   ```
+   bash scripts/proxy-e2e-redis-test.sh
+   ```
 5. If any tests fail, fix the issues and re-run until all tests pass.
 
 All script paths are relative to this skill's directory.
diff --git a/.openclaw/skills/srs-develop/scripts/proxy-e2e-redis-test.sh b/.openclaw/skills/srs-develop/scripts/proxy-e2e-redis-test.sh
new file mode 100755
index 000000000..148a81d18
--- /dev/null
+++ b/.openclaw/skills/srs-develop/scripts/proxy-e2e-redis-test.sh
@@ -0,0 +1,324 @@
+#!/bin/bash
+# E2E test for RTMP proxy Redis load balancer: starts two proxy instances with
+# Redis-backed shared state + one SRS origin. The origin registers through proxy A,
+# publishing goes through proxy A, and playback goes through proxy B. Playback must
+# succeed because proxy B resolves the stream-to-origin mapping from Redis.
+set -e
+
+SCRIPT_DIR="$(cd -P "$(dirname "$0")" && pwd)"
+# Navigate: scripts/ -> srs-develop/ -> skills/ -> .openclaw/ -> srs
+WORKSPACE="$(cd -P "$SCRIPT_DIR/../../../.." && pwd)"
+
+if [[ ! -f "$WORKSPACE/go.mod" ]]; then
+  echo "Error: go.mod not found in WORKSPACE: $WORKSPACE" >&2
+  exit 1
+fi
+
+# Ports — use high ports to avoid conflicts with running services.
+# Each proxy starts ALL servers, so each proxy needs a unique full port set.
+PROXY_A_RTMP_PORT=11935
+PROXY_A_HTTP_API_PORT=11985
+PROXY_A_HTTP_SERVER_PORT=18080
+PROXY_A_WEBRTC_PORT=18000
+PROXY_A_SRT_PORT=20080
+PROXY_A_SYSTEM_API_PORT=12025
+
+PROXY_B_RTMP_PORT=11936
+PROXY_B_HTTP_API_PORT=11986
+PROXY_B_HTTP_SERVER_PORT=18081
+PROXY_B_WEBRTC_PORT=18001
+PROXY_B_SRT_PORT=20081
+PROXY_B_SYSTEM_API_PORT=12026
+
+REDIS_HOST="${PROXY_REDIS_HOST:-127.0.0.1}"
+REDIS_PORT="${PROXY_REDIS_PORT:-6379}"
+REDIS_PASSWORD="${PROXY_REDIS_PASSWORD:-}"
+REDIS_DB="${PROXY_REDIS_DB:-0}"
+PYTHON_BIN="${PYTHON_BIN:-python3}"
+
+SOURCE_FLV="$WORKSPACE/trunk/doc/source.flv"
+SRS_BINARY="$WORKSPACE/trunk/objs/srs"
+TEST_STREAM_URL="__defaultVhost__/live/livestream"
+
+# PIDs to clean up on exit.
+PROXY_A_PID=""
+PROXY_B_PID=""
+ORIGIN_PID=""
+FFMPEG_PID=""
+
+redis_cli() {
+  if [[ -n "$REDIS_PASSWORD" ]]; then
+    redis-cli -h "$REDIS_HOST" -p "$REDIS_PORT" -a "$REDIS_PASSWORD" -n "$REDIS_DB" "$@"
+  else
+    redis-cli -h "$REDIS_HOST" -p "$REDIS_PORT" -n "$REDIS_DB" "$@"
+  fi
+}
+
+cleanup_redis_state() {
+  # Remove only the Redis records created by this E2E test. Never flush the DB,
+  # and never delete every srs-proxy-* key because the same Redis DB may be used
+  # by another proxy/origin-cluster test or by a developer's local proxy.
+  if ! command -v redis-cli &>/dev/null; then
+    return
+  fi
+  if ! command -v "$PYTHON_BIN" &>/dev/null; then
+    echo "Skip Redis cleanup: $PYTHON_BIN is not available"
+    return
+  fi
+  if ! redis_cli ping 2>/dev/null | grep -q "PONG"; then
+    echo "Skip Redis cleanup: Redis is not available at $REDIS_HOST:$REDIS_PORT db=$REDIS_DB"
+    return
+  fi
+
+  local count=0
+  local stream_key="srs-proxy-url:$TEST_STREAM_URL"
+  if [[ "$(redis_cli exists "$stream_key" 2>/dev/null || echo 0)" != "0" ]]; then
+    redis_cli del "$stream_key" >/dev/null 2>&1 || true
+    count=$((count + 1))
+  fi
+
+  # The origin server generates its server key from runtime IDs, so discover only
+  # server records that match this test origin's identity and configured ports.
+  local server_keys=()
+  local key value
+  while IFS= read -r key; do
+    [[ -z "$key" ]] && continue
+    value="$(redis_cli get "$key" 2>/dev/null || true)"
+    if [[ "$value" == *'"device_id":"origin1"'* && \
+          "$value" == *'"rtmp":["19351"]'* && \
+          "$value" == *'"http":["8081"]'* && \
+          "$value" == *'"api":["19851"]'* ]]; then
+      server_keys+=("$key")
+      redis_cli del "$key" >/dev/null 2>&1 || true
+      count=$((count + 1))
+    fi
+  done < <(redis_cli --scan --pattern 'srs-proxy-server:*' 2>/dev/null || true)
+
+  # Keep the shared server index, but remove only the test origin server keys.
+  if [[ ${#server_keys[@]} -gt 0 ]]; then
+    local servers_json updated_json
+    servers_json="$(redis_cli get srs-proxy-all-servers 2>/dev/null || true)"
+    if [[ -n "$servers_json" ]]; then
+      updated_json="$($PYTHON_BIN - "$servers_json" "${server_keys[@]}" <<'PY'
+import json, sys
+servers = json.loads(sys.argv[1]) if sys.argv[1] else []
+remove = set(sys.argv[2:])
+servers = [server for server in servers if server not in remove]
+print(json.dumps(servers, separators=(",", ":")))
+PY
+)"
+      if [[ "$updated_json" == "[]" ]]; then
+        redis_cli del srs-proxy-all-servers >/dev/null 2>&1 || true
+      else
+        redis_cli set srs-proxy-all-servers "$updated_json" >/dev/null 2>&1 || true
+      fi
+    fi
+  fi
+
+  echo "Cleaned $count Redis proxy test key(s)."
+}
+cleanup() {
+  echo ""
+  echo "=== Cleaning up ==="
+  for pid in $PROXY_A_PID $PROXY_B_PID $ORIGIN_PID $FFMPEG_PID; do
+    if kill -0 "$pid" 2>/dev/null; then
+      kill "$pid" 2>/dev/null || true
+    fi
+  done
+  sleep 1
+  for pid in $PROXY_A_PID $PROXY_B_PID $ORIGIN_PID $FFMPEG_PID; do
+    if kill -0 "$pid" 2>/dev/null; then
+      kill -9 "$pid" 2>/dev/null || true
+    fi
+  done
+  cleanup_redis_state
+  echo "Cleanup done."
+}
+trap cleanup EXIT
+
+echo "=== E2E RTMP Proxy Redis Load Balancer Test ==="
+echo "Workspace: $WORKSPACE"
+echo "Redis: $REDIS_HOST:$REDIS_PORT db=$REDIS_DB"
+echo ""
+
+# --- Pre-checks ---
+if [[ ! -f "$SOURCE_FLV" ]]; then
+  echo "Error: test source not found: $SOURCE_FLV" >&2
+  exit 1
+fi
+if ! command -v ffmpeg &>/dev/null; then
+  echo "Error: ffmpeg not found in PATH" >&2
+  exit 1
+fi
+if ! command -v ffprobe &>/dev/null; then
+  echo "Error: ffprobe not found in PATH" >&2
+  exit 1
+fi
+if ! command -v redis-cli &>/dev/null; then
+  echo "Error: redis-cli not found in PATH" >&2
+  echo "Install Redis on macOS with: brew install redis" >&2
+  exit 1
+fi
+if ! redis_cli ping 2>/dev/null | grep -q "PONG"; then
+  echo "Error: Redis is not available at $REDIS_HOST:$REDIS_PORT db=$REDIS_DB" >&2
+  echo "Start Redis on macOS with: brew services start redis" >&2
+  echo "Or run a foreground Redis with: redis-server" >&2
+  exit 1
+fi
+
+# Origin ports (from origin1-for-proxy.conf).
+ORIGIN_RTMP_PORT=19351
+ORIGIN_HTTP_PORT=8081
+ORIGIN_API_PORT=19851
+ORIGIN_RTC_PORT=8001
+ORIGIN_SRT_PORT=10081
+
+# --- Step 0: Clean up stale state ---
+# Remove stale SRS PID file that prevents restart.
+rm -f "$WORKSPACE/trunk/objs/origin1.pid"
+cleanup_redis_state
+# Kill any leftover processes on our ports (proxy A + proxy B + origin).
+ALL_PORTS="$PROXY_A_RTMP_PORT $PROXY_A_HTTP_API_PORT $PROXY_A_HTTP_SERVER_PORT $PROXY_A_WEBRTC_PORT $PROXY_A_SRT_PORT $PROXY_A_SYSTEM_API_PORT $PROXY_B_RTMP_PORT $PROXY_B_HTTP_API_PORT $PROXY_B_HTTP_SERVER_PORT $PROXY_B_WEBRTC_PORT $PROXY_B_SRT_PORT $PROXY_B_SYSTEM_API_PORT $ORIGIN_RTMP_PORT $ORIGIN_HTTP_PORT $ORIGIN_API_PORT $ORIGIN_RTC_PORT $ORIGIN_SRT_PORT"
+for port in $ALL_PORTS; do
+  lsof -ti :"$port" 2>/dev/null | xargs kill 2>/dev/null || true
+done
+sleep 1
+
+# --- Step 1: Build proxy ---
+echo "=== Step 1: Building proxy ==="
+cd "$WORKSPACE"
+make -s 2>&1
+echo "Proxy built: $WORKSPACE/bin/srs-proxy"
+
+# --- Step 2: Build SRS origin (if not already built) ---
+if [[ ! -f "$SRS_BINARY" ]]; then
+  echo "=== Step 2: Building SRS origin ==="
+  cd "$WORKSPACE/trunk"
+  ./configure && make 2>&1 | tail -3
+  echo "SRS origin built: $SRS_BINARY"
+else
+  echo "=== Step 2: SRS origin already built ==="
+fi
+
+# --- Step 3: Start proxy A ---
+echo "=== Step 3: Starting proxy A (RTMP :$PROXY_A_RTMP_PORT, System API :$PROXY_A_SYSTEM_API_PORT) ==="
+cd "$WORKSPACE"
+env PROXY_RTMP_SERVER=$PROXY_A_RTMP_PORT \
+    PROXY_HTTP_API=$PROXY_A_HTTP_API_PORT \
+    PROXY_HTTP_SERVER=$PROXY_A_HTTP_SERVER_PORT \
+    PROXY_WEBRTC_SERVER=$PROXY_A_WEBRTC_PORT \
+    PROXY_SRT_SERVER=$PROXY_A_SRT_PORT \
+    PROXY_SYSTEM_API=$PROXY_A_SYSTEM_API_PORT \
+    PROXY_LOAD_BALANCER_TYPE=redis \
+    PROXY_REDIS_HOST="$REDIS_HOST" \
+    PROXY_REDIS_PORT="$REDIS_PORT" \
+    PROXY_REDIS_PASSWORD="$REDIS_PASSWORD" \
+    PROXY_REDIS_DB="$REDIS_DB" \
+    ./bin/srs-proxy >/tmp/srs-proxy-redis-a-e2e.log 2>&1 &
+PROXY_A_PID=$!
+echo "Proxy A PID: $PROXY_A_PID"
+sleep 1
+
+if ! kill -0 "$PROXY_A_PID" 2>/dev/null; then
+  echo "Error: proxy A failed to start. Logs:" >&2
+  cat /tmp/srs-proxy-redis-a-e2e.log >&2
+  exit 1
+fi
+echo "Proxy A started."
+
+# --- Step 4: Start proxy B ---
+echo "=== Step 4: Starting proxy B (RTMP :$PROXY_B_RTMP_PORT, System API :$PROXY_B_SYSTEM_API_PORT) ==="
+cd "$WORKSPACE"
+env PROXY_RTMP_SERVER=$PROXY_B_RTMP_PORT \
+    PROXY_HTTP_API=$PROXY_B_HTTP_API_PORT \
+    PROXY_HTTP_SERVER=$PROXY_B_HTTP_SERVER_PORT \
+    PROXY_WEBRTC_SERVER=$PROXY_B_WEBRTC_PORT \
+    PROXY_SRT_SERVER=$PROXY_B_SRT_PORT \
+    PROXY_SYSTEM_API=$PROXY_B_SYSTEM_API_PORT \
+    PROXY_LOAD_BALANCER_TYPE=redis \
+    PROXY_REDIS_HOST="$REDIS_HOST" \
+    PROXY_REDIS_PORT="$REDIS_PORT" \
+    PROXY_REDIS_PASSWORD="$REDIS_PASSWORD" \
+    PROXY_REDIS_DB="$REDIS_DB" \
+    ./bin/srs-proxy >/tmp/srs-proxy-redis-b-e2e.log 2>&1 &
+PROXY_B_PID=$!
+echo "Proxy B PID: $PROXY_B_PID"
+sleep 1
+
+if ! kill -0 "$PROXY_B_PID" 2>/dev/null; then
+  echo "Error: proxy B failed to start. Logs:" >&2
+  cat /tmp/srs-proxy-redis-b-e2e.log >&2
+  exit 1
+fi
+echo "Proxy B started."
+
+# --- Step 5: Start SRS origin ---
+echo "=== Step 5: Starting SRS origin ==="
+ulimit -n 10000 2>/dev/null || true
+cd "$WORKSPACE/trunk"
+./objs/srs -c conf/origin1-for-proxy.conf >/tmp/srs-origin-redis-e2e.log 2>&1 &
+ORIGIN_PID=$!
+echo "SRS origin PID: $ORIGIN_PID"
+
+# Wait for SRS to start and register with proxy A (heartbeat interval is 9s).
+echo "Waiting for SRS origin to register with proxy A and Redis (up to 15s)..."
+sleep 12
+
+if ! kill -0 "$ORIGIN_PID" 2>/dev/null; then
+  echo "Error: SRS origin failed to start. Logs:" >&2
+  cat /tmp/srs-origin-redis-e2e.log >&2
+  exit 1
+fi
+if ! redis_cli --scan --pattern 'srs-proxy-server:*' | grep -q 'srs-proxy-server:'; then
+  echo "Error: SRS origin did not register in Redis. Proxy A logs:" >&2
+  cat /tmp/srs-proxy-redis-a-e2e.log >&2
+  exit 1
+fi
+echo "SRS origin started and registered in Redis."
+
+# --- Step 6: Publish RTMP stream to proxy A ---
+echo "=== Step 6: Publishing RTMP stream to proxy A ==="
+ffmpeg -stream_loop -1 -re -i "$SOURCE_FLV" -c copy -f flv \
+  "rtmp://localhost:$PROXY_A_RTMP_PORT/live/livestream" >/tmp/srs-ffmpeg-redis-e2e.log 2>&1 &
+FFMPEG_PID=$!
+echo "FFmpeg publisher PID: $FFMPEG_PID"
+
+# Wait for stream to stabilize.
+sleep 5
+
+if ! kill -0 "$FFMPEG_PID" 2>/dev/null; then
+  echo "Error: FFmpeg publisher failed. Logs:" >&2
+  cat /tmp/srs-ffmpeg-redis-e2e.log >&2
+  exit 1
+fi
+echo "Stream publishing through proxy A."
+
+# --- Step 7: Verify RTMP playback through proxy B ---
+echo "=== Step 7: Verifying RTMP playback through proxy B ==="
+PROBE_OUTPUT=$(ffprobe -v error -show_streams \
+  "rtmp://localhost:$PROXY_B_RTMP_PORT/live/livestream" 2>&1 || true)
+
+if echo "$PROBE_OUTPUT" | grep -q "codec_type=video"; then
+  echo "PASS: Video stream detected through proxy B."
+else
+  echo "FAIL: No video stream detected through proxy B." >&2
+  echo "ffprobe output:" >&2
+  echo "$PROBE_OUTPUT" >&2
+  echo "Proxy B logs:" >&2
+  cat /tmp/srs-proxy-redis-b-e2e.log >&2
+  exit 1
+fi
+
+if echo "$PROBE_OUTPUT" | grep -q "codec_type=audio"; then
+  echo "PASS: Audio stream detected through proxy B."
+else
+  echo "FAIL: No audio stream detected through proxy B." >&2
+  echo "ffprobe output:" >&2
+  echo "$PROBE_OUTPUT" >&2
+  echo "Proxy B logs:" >&2
+  cat /tmp/srs-proxy-redis-b-e2e.log >&2
+  exit 1
+fi
+
+echo ""
+echo "=== E2E RTMP Proxy Redis Load Balancer Test PASSED ==="